Dante® (digital audio network through Ethernet) is a powerful technology that
allows many audio channels to be sent and received through Ethernet. CPLUSV4H2HP-DT integrates Dante® technology and 4X2 matrix. It allows the user to
route four 18Gbps HDMI input signals to any of two 18Gbps HDMI and Dante
digital audio outputs. Dante® digital audio output enables audio transport of up
to two stereo audio signals over a network using standard Internet protocols.
It also supports AES67 and Audinate Dante® Controller. Ethernet is used for
remote control while a front panel with buttons optimized for use in challenging
environments, allows full local control of all features. The integration of Dante®
audio out facilitates system expansion when paired with many of Cypress?s
Dante-enabled audio processing products.
- Enabled HDMI de-embedded/embedded designed to bridge 2-channel
PCM HDMI audio to/from a Dante audio network.
- Balance Audio out can be switch between HDMI De-embedded audio or
Dante®
-In source
- Dante audio networking utilizes standard IP networks to transmit
high-quality, uncompressed audio with near-zero latency
- Non-compress audio performance
- Audio output supports 48KHz Sampling Rate
- Supports Dante / AES67 inputs and outputs
- Sample-accurate time alignment between networked devices
- Real-time latency statistics, Clock status statistics and signal presence
exposed to network
Interfaces | |
---|
Input Port | |
Output Port | - 2 HDMI (Type-A)
- 2 Stereo Analog Out (5-pin Terminal Block)
|
Control I/O | - 1 RS-232 (3-pin Terminal Block)
- 1 LAN (RJ-45)
|
Service Port | |
Ethernet Port | |
Video | |
---|
HDMI Compliance | |
HDCP Compliance | |
Input Signal Types | - 4096x2160@60 8bit YUV 4:4:4
|
Output Signal Type | - 4096x2160@60 8bit YUV 4:4:4
|
Resolutions | | |
---|
Maximum Input | HDMI | |
Maximum Output | HDMI | |
Audio | | |
---|
Analog Out | DAC | - Max Audio Level: 4.2Vrms
- Impedance: 5kOhm
- Type: Balanced S/N
- Ratio: > 70dB (1kHz with 0dBFS)
|
Power | |
---|
Power Supply | |
Power Consumption | |
Enclosure | |
---|
Chassis Material | |
Chassis Color | |
Dimensions (W×H×D) | - 240mm× 43mm× 104mm [Case Only]
- 240mm× 48mm× 112mm [All Inclusive]
|
Weight | |
Ordering Information | |
---|
Model No. | Product Description |
CPLUS-V4H2HP-DT | - UHD+ 4x2 HDMI Matrix with Dante Audio
|
AIP-D4101 | - 4 Balance In, Analog Audio to Dante
|
AIP-D1401 | - 4 Balance Out, Dante to Analog Audio
|