NAV-U353RX is part of a 4K UHD Multi-Function Extension system that allows you to extend HDMI or VGA signals along with KVM using the TCP/ IP protocol over regular Cat.5e/6/7 network cable. This extender supports the transmission of Ultra High-Definition signals (up to 4K@30Hz YUV 4:4:4 or 4K@60Hz YUV 4:2:0) with audio and USB up to 100m on a single cable. The transmission distance can be further extended (up to 100m per segment) by using gigabit network switches, allowing the user to cascade the system without signal loss or introducing delay. NAV-U353RX also allows you to send a single AV signal to a large number of Receivers within the same local network. Additionally, that same multicast signal can be used to create large multi-display video walls with amazing simplicity. This system is perfect for both residential and commercial installation environments.
- Video, audio and control transmission over TCP/IP in Unicast (point-to-point) or Multicast (single-to-many) modes
- Support with 0°, 180°, 270° increments rotation
- The analog Line In on the Transmitter sends audio directly to the analog Line Out and is inserted into the HDMI output on connected Receivers
- The Mic In on the Receiver sends audio directly to the analog Line Out on the Transmitter
- Both Tx and Rx may be powered directly by PoE when connected to a Gigabit Ethernet switch that provides PoE (802.3af)
- Supports USB keyboard, mouse and storage extension and IR ,RS-232 bypass
- Unit can be controlled via WebGUI, Telnet, and front panel controls
- Supports Key Control(show me function), can connect key pad through popular RJ-45 connector (key pad is optional)
Interfaces | |
Input Port | 1×Analog Stereo (3.5mm) |
Output Port | 1×HDMI (Type-A) 1×S/PDIF (TOSLINK) 1×Analog Stereo (3.5mm) |
Bi-Directional Port | 3×GbE LAN (RJ-45) |
Control I/O | 2×USB2.0 (Type-A) 2×USB1.1 (Type-A) 1×IR Extender (3.5mm) 1×IR Blaster (3.5mm) 1×RS232 (3-pin terminal block) 2×Control button(RJ-45) |
Video | ||
HDMI Compliance | HDMI 2.0 (DVI 1.0) | |
HDCP Compliance | HDCP 2.x | |
Input Signal Type | 4096x2160p@30 8bit RGB | |
Output Signal Type | 4096x2160p@30 8bit RGB | |
Resolutions | ||
Maximum Input | LAN (Streaming) | 4096×2160p@30 |
Maximum Output | HDMI | 4096×2160p@30 |
Audio | ||
Digital Formats | HDMI | LPCM (8Channels), Bitstream, High Bit Rate Bitstream |
Line Out/ Optical Out | LPCM (2Channels) | |
Line Level | Mic In | 300 mVrms, S/N Ratio: |
Line Out | 2 Vrms, S/N Ratio: |
Power | |
Power Supply | 5V/ 4A DC (Locking) or PoE |
Power Consumption | 21.78W |
Enclosure | |
Chassis Material | Metal(Steel) |
Chassis Color | Black |
Dimensions (W×H×D) | 231.5mm×25mm×108mm [Case Only] 231.5mm×25mm×120mm [All Inclusive] |
Weight | 660g |
Field Firmware Update |
WebGUI |
ORDERING INFORMATION |
Model No. | Product Description |
NAV-U353RX | UHD Video over IP Rx |
NAV-U350HTX | HDMI/VGA over IP Transmitter with USB/KVM Extension |
NAV-CS7 | IP Master Controller |
ADP-059-SWAT | Switching Power Supply 5VDC/4A |
CBL-IR10C3SA200 | 3.5?IR cable L:200cm 30-50KHz |
CBL-E3.5IF-20A | 3.5?IR cable(Blaster) 2725#28 L:200cm |
TML-F7353-03 | RS232 3-pin terminal block |
CBL-MPBCAT-10 | Key in cable (1M) |