This 4×2 HDMI to HDBaseT/HDMI Matrix with Stereo Amplifier provides high
performance audio and video support, including HDR and ARC, making it ideally
suited for multi-zone residential or corporate installations. Any of four highbandwidth (18Gbps) HDMI sources may be routed to either of the two HDBaseT
Zone outputs via a single Cat.5e/6/7 cable (up to 70m at 1080p or up to 35m
at 4K) with Zone A?s output also being mirrored to a local HDMI output. Despite
HDBaseT?s 10.2Gbps bandwidth limitation, 4K UHD HDMI video sources, up
to and including 4K@60Hz (4:4:4, 8-bit) as well as 10/12-bit sources with
HDR, are able to be processed and extended by the use of AVLC (Adaptive
Visually Lossless Compression) when connected to compatible AVLC Receivers
providing gorgeous video quality.
Pass-through of multiple digital audio formats such as LPCM 7.1, Bitstream
and advanced HD Bitstream with audio sampling rates up to 192kHz are
supported via the HDBaseT and HDMI outputs. Additionally, the integrated
stereo amplifier provides up to 40 watts of power (20W per channel) for local
speakers to output the audio from the sources routed to either of the HDBaseT
outputs, or from the ARC audio coming back from the display connected to the
HDMI output, offering a flexible sound experience (LPCM 2.0 sources only).
This unit also contains a specialised IR learning and smart-routing functionality.
IR codes from each connected source?s remote can be learned and then
recalled using this unit?s dedicated remote control, or the mobile device
app. Intelligent IR routing ensures that only the IR signals appropriate to the
source being viewed in the current zone are used by the dedicated remote
control while the mobile device app provides the ability to send IR commands
to control any connected source. IR command sets may also be uploaded or
downloaded to/from the unit via XML files.
The 48V PoH (Power over HDBaseT) function can provide power to compatible
Receivers, providing greater flexibility in installations. This unit can be
controlled in a wide variety of different ways including front panel buttons, RS232, IR remote, Telnet, WebGUI and a mobile device app.
- HDMI with HDR, 3D & 4096 x 2160p@60Hz support, DVI 1.0 compatible
- Routes four HDMI sources to two HDBaseT outputs with a mirrored HDMI
output with support for automatic input switching
- Supports up to 4K UHD (18Gbps, 4096 x 2160p@50/60Hz 4:4:4, 8-bit)
video input and output
Note: Support of resolutions with bandwidth above 10.2Gbps via HDBaseT
requires a compatible AVLC Receiver.
- Supports ?Deep Colour? input and output up to 12-bit
- Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output
- HDBaseT feature support: HD Video and Audio, 48V PoH and Control (bidirectional IR pass-through)
- HDBaseT outputs provide simultaneous transmission of uncompressed
video, audio and data over a single Cat.5e/6/7 cable up to 70m/230ft at
1080p and 35m/115ft at 4K
- Integrated AVLC (Adaptive Visually Lossless Compression) activates when
the bandwidth requirements of the source are beyond 10.2Gbps (340MHz)
allowing for support of sources up to 18Gbps (600MHz) with no loss of
visual quality
- Per-output, selectable, 4K to 1080p down-scaling/colour space conversion
(4:4:4 to 4:2:0)
- Supports pass-through of LPCM 7.1, Bitstream and advanced HD
Bitstream audio formats
- Supports the Audio Return Channel (ARC) function to transmit digital audio
from an ARC-enabled TV connected to the HDMI output (LPCM 2.0 only)
- Selectable stereo analogue audio breakout mirrored to both amplified (20W
per channel) and un-amplified (3.5mm headphone) connections. (LPCM 2.0
only)
- Support for learning IR remote codes for on-demand retransmission
Interfaces | |
---|
Input Port | |
Output Port | - 1×HDMI (Type-A)
- 2×HDBaseT (RJ-45)
- 1×Analogue Stereo (2×Terminal Block)
- 1×Analogue Stereo (3.5mm)
|
Control I/O | - 1×RS-232 (DE-9)
- 1×IP Control (RJ-45)
|
Bypass Port | |
Service Port | |
Video | | |
---|
HDMI Compliance | | |
HDCP Compliance | | |
Input Signal Types | | |
Output Signal Type | HDMI | |
| HDBaseT | |
Resolutions | | |
---|
Maximum Input | HDMI | |
Maximum Output | HDMI | |
| HDBaseT | |
Audio | | |
---|
| HDMI | - LPCM 8 channel Bitstream High-Definition Bitstream
|
| Line Out | - Max Audio Level: 2Vrms Impedance: 10k? Type: Unbalanced
|
Power | |
---|
Power Supply | |
Power Consumption | |
Enclosure | |
---|
Chassis Material | |
Chassis Color | |
Dimensions (W×H×D) | - 219mm×43mm×156mm (W×H×D) [Case Only]
- 219mm×54mm×163.5mm (W×H×D) [All Inclusive]
|
Weight | |
Field Firmware Update | |
---|
Interface | |
Ordering Information | |
---|
Model No. | Product Description |
CPLUS-421PLV | - UHD+ 4x2 HDMI to HDBaseT / HDMI Matrix AV System
|
CH-1527RXPLV | - UHD+ HDMI over HDBaseT Receiver with HDR
|