Moxa EDS-518E-SS-SC-4GTXSFP-T
EDS-518E-SS-SC-4GTXSFP-T
EDS-518E Series
Managed Gigabit Ethernet switch with 12 10/100BaseT(X) ports, 4 10/100/1000BaseT(X) or 100/1000BaseSFP ports, 2 100BaseFX single-mode ports with SC connector, -40 to 75°C operating temperature
Input/Output Interface
Alarm Contact Channels
- 1, Relay output with current carrying capacity of 1 A @ 24 VDC
Buttons
- Reset button
Digital Input Channels
- 1
Digital Inputs
- +13 to +30 V for state 1
-30 to +3 V for state 0
Max. input current: 8 mA
- +13 to +30 V for state 1
Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector)
- 12
Auto negotiation speed
Full/Half duplex mode
Auto MDI/MDI-X connection
- 12
Combo Ports (10/100/1000BaseT(X) or 100/1000BaseSFP+)
- 4
10/100/1000BaseT(X) Ports (RJ45 connector)
- Auto negotiation speed
Full/Half duplex mode
Auto MDI/MDI-X connection
- Auto negotiation speed
100BaseFX Ports (single-mode SC connector)
- 2
Optical Fiber
Optical Fiber
100BaseFX Multi-Mode Single-Mode Fiber Cable Type OM1 50/125 µm G.652 800 MHz x km Typical Distance 4 km 5 km 40 km Wavelength Typical (nm) 1300 1310 TX Range (nm) 1260 to 1360 1280 to 1340 RX Range (nm) 1100 to 1600 1100 to 1600 Optical Power TX Range (dBm) -10 to -20 0 to -5 RX Range (dBm) -3 to -32 -3 to -34 Link Budget (dB) 12 29 Dispersion Penalty (dB) 3 1 Note: When connecting a single-mode fiber transceiver, we recommend using an attenuator to prevent damage caused by excessive optical power.
Note: Compute the ?typical distance? of a specific fiber transceiver as follows: Link budget (dB) > dispersion penalty (dB) + total link loss (dB).
Standards
- IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseSX/LX/LHX/ZX
IEEE 802.3x for flow control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1p for Class of Service
IEEE 802.1Q for VLAN Tagging
IEEE 802.1X for authentication
IEEE 802.3ad for Port Trunk with LACP
- IEEE 802.3 for 10BaseT
Ethernet Software Features
Filter
- 802.1Q VLAN, Port-based VLAN, GVRP, IGMP v1/v2/v3, GMRP
Industrial Protocols
- EtherNet/IP, Modbus TCP, PROFINET IO Device (Slave)
Management
- LLDP, Back Pressure Flow Control, BOOTP, Port Mirror, DHCP Option 66/67/82, DHCP Server/Client, Fiber check, Flow control, IPv4/IPv6, RARP, RMON, SMTP, SNMP Inform, SNMPv1/v2c/v3, Syslog, Telnet, TFTP
MIB
- Ethernet-like MIB, MIB-II, Bridge MIB, P-BRIDGE MIB, Q-BRIDGE MIB, RMON MIB Groups 1, 2, 3, 9, RSTP MIB
Redundancy Protocols
- Link Aggregation, MSTP, RSTP, STP, Turbo Chain, Turbo Ring v1/v2
Security
- Broadcast storm protection, HTTPS/SSL, TACACS+, SNMPv3, MAB authentication, Sticky MAC, NTP authentication, MAC ACL, Port Lock, RADIUS, SSH, SMTP with TLS
Time Management
- NTP Server/Client, SNTP
Switch Properties
IGMP Groups
- 2048
MAC Table Size
- 16 K
Max. No. of VLANs
- 64
Packet Buffer Size
- 1 Mbits
Priority Queues
- 4
VLAN ID Range
- VID 1 to 4094
USB Interface
Storage Port
- USB Type A
LED Interface
LED Indicators
- PWR1, PWR2, STATE, FAULT, 10/100M (TP port), 100M (fiber port), Gigabit combo port, MSTR/HEAD, CPLR/TAIL
Serial Interface
Console Port
- USB-serial console (Type B connector)
DIP Switch Configuration
DIP Switches
- Turbo Ring, Master, Coupler, Reserve
Power Parameters
Connection
- 2 removable 4-contact terminal block(s)
Input Current
- 0.41 A @ 24 VDC
Input Voltage
- 12/24/48/-48 VDC, Redundant dual inputs
Operating Voltage
- 9.6 to 60 VDC
Overload Current Protection
- Supported
Reverse Polarity Protection
- Supported
Physical Characteristics
Housing
- Metal
IP Rating
- IP30
Dimensions
- 94 x 135 x 137 mm (3.7 x 5.31 x 5.39 in)
Weight
- 1518 g (3.35 lb)
Installation
- DIN-rail mounting, Wall mounting (with optional kit)
Environmental Limits
Operating Temperature
- -40 to 75°C (-40 to 167°F)
Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
- 5 to 95% (non-condensing)
Standards and Certifications
Safety
- UL 508, EN 60950-1 (LVD)
EMC
- EN 61000-6-2/-6-4
EMI
- CISPR 32, FCC Part 15B Class A
EMS
- IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
- IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
Hazardous Locations
- ATEX, Class I Division 2
Maritime
- DNV-GL, LR, ABS, NK
Power Substation
- IEC 61850-3, IEEE 1613
Railway
- EN 50121-4
Traffic Control
- NEMA TS2
Shock
- IEC 60068-2-27
Freefall
- IEC 60068-2-32
Vibration
- IEC 60068-2-6
MTBF
Time
- 723,953 hrs
Standards
- Telcordia (Bellcore), GB
Warranty
Warranty Period
- 5 years
Details