Moxa VPort 461A
VPort 461A
VPort 461A Series
Full Motion, 1-ch industrial video encoder, 2 10/100BaseT(X) Ethernet ports, -25 to 60°C
Memory
SD Slot
- SDXC
Input/Output Interface
Digital Input Channels
- 2
Digital Inputs
- +13 to +30 V for state 1
-30 to +1 V for state 0
Max. input current: 8 mA
- +13 to +30 V for state 1
Relay Channels
- 2
Contact Current Rating
- Resistive load: 1 A @ 24 VDC
Connector
- Terminal block
Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector)
- 2
Ethernet Software Features
Protocols
- TCP/IP, IPv4/IPv6, UDP, HTTP, RTP/RTSP, ARP, UPnP, FTP, TFTP, SMTP, NTP Client, DNS, DDNS, QoS, IGMP v3, ICMP, SNMPv1/v2c/v3, Modbus TCP, HTTPS, 802.1X, NTCIP
Security Functions
Password
- User-level password protection
Filter
- IP address
Authentication
- 802.1X
Encryption
- HTTPS
LED Interface
LED Indicators
- STAT: Indicates if system is booted up properly or not
Power 1: Power 1 on/off
Power 2: Power 2 on/off
FAULT: Can be configured to correspond to system alarm, power failure, or disconnected network
Video: Video input signal
PTZ: Indicates if PTZ or COM port data has been transmitted
SD: Indicates if SD card was mounted successfully
Network: 10 Mbps or 100 Mbps
- STAT: Indicates if system is booted up properly or not
Serial Interface
PTZ Port
- 1, RS-232 or RS-422/485 port, terminal block connector, 115.2 kbps
COM Port
- 1, RS-232 or RS-485 port, DB9 male connector, 115.2 kbps
Console Port
- 1 RS-232 port, 10-pin RJ45 (115200, n, 8, 1)
Power Parameters
No. of Power Inputs
- 2
Input Voltage
- Redundant dual inputs
Operating Voltage
- 12 to 32 VDC, 18 to 30 VAC
Input Current
- 0.85 A @ 12 VDC, 0.3 A @ 32 VDC
0.56/0.85 A @ 30/18 VAC
- 0.85 A @ 12 VDC, 0.3 A @ 32 VDC
Power Connector
- 2-pin terminal block
Video Interface
Video Compression
- H.264 (ISO/IEC 14496-10) or MJPEG
Video Input
- 1, BNC connector (1.0 Vpp, 75 ohm)
Video Output
- via Ethernet
Video Streams
- 4 independent H.264 or MJPEG video streams
NTSC/PAL
- Auto-sensing or manual
Video Resolution and FPS (frames per second)
Video Resolution and FPS (frames per second)
NTSC PAL Size Max. FPS Size Max. FPS QCIF 176 x 112 30 176 x 144 25 CIF 352 x 240 30 352 x 288 25 VGA 640 x 480 30 640 x 480 25 4CIF 704 x 480 30 704 x 576 25 Full D1 720 x 480 30 720 x 576 25
Video Viewing
- DynaStream? support for changing the video frame rate automatically
CBR Pro? for good image quality in limited bandwidth transmissions
Adjustable image size and quality
Timestamp and text overlay
OSD (On Screen Display) position adjustable
Image manipulation: 180° rotation
Image tuning: control brightness, contrast, saturation
Maximum of 10 simultaneous unicast connections, 50 multicast clients
- DynaStream? support for changing the video frame rate automatically
Audio Interface
Audio Inputs
- 1 Line-in or MIC-in with 3.5 mm phone jack
Audio Outputs
- 1 Line-out, with 3.5 mm phone jack
Audio Format
- Mono, PCM (G.711)
Camera Software Development
VPort SDK PLUS
- Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third-party developers
Video Standards
- ONVIF Profile S
Camera PAN/TILT/ZOOM
PTZ Camera Control
- Via PTZ port or COM port
PTZ Control Functions
- Pan, tilt, zoom, focus, move speed, preset position (max. 128 positions)
PTZ Function Updates
- Driver upload supported
Protocols
- Pelco D, Pelco P, Custom Camera
Camera Alarm Software Features
Intelligent Video
- Camera tampering detection
Video Motion Detection
- 3 independently configurable areas
Scheduling
- Daily repeat timing schedule
Imaging
- JPEG snapshots for pre/trigger/post alarm images
Custom Alarms
- HTTP event servers for setting customized alarm actions
Email/FTP Messaging
- Automatic transfer of stored images via email or FTP as event-triggered actions
Pre-Alarm Buffer
- 50 MB video buffer for JPEG snapshot images
Video Recording
- Event recordings stored on the SD card
Software Requirements
Memory Size
- 1 GB
Operating System
- Windows 7 or above
Browser
- Internet Explorer 9.x or above
Multimedia
- DirectX 9.0C or above
Physical Characteristics
Housing
- Metal
Dimensions
- 46 x 134 x 105 mm (1.81 x 5.31 x 4.13 in)
Weight
- 710 g (1.57 lb)
Installation
- DIN-rail mounting, Wall mounting (with optional kit)
Environmental Limits
Operating Temperature
- -25 to 60°C (-13 to 140°F)
Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
- 5 to 95% (non-condensing)
Altitude
- 2000 m
Standards and Certifications
EMI
- CISPR 32, FCC Part 15B Class A
EMS
- IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
IEC 61000-4-11 DIPs
- IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
Freefall
- IEC 60068-2-31
Safety
- UL 60950-1
Shock
- IEC 60068-2-27
Traffic Control
- NEMA TS2
Vibration
- IEC 60068-2-6
MTBF
Time
- 647,088 hrs
Standards
- Telcordia SR332
Warranty
Warranty Period
- 5 years
Details