This 1×4+1 4K UHD HDMI Splitter provides an advanced solution for splitting
and distributing a single HDMI input (up to 4K@60Hz w/ HDMI 2.0 & HDCP 2.X)
to 4 HDBaseT outputs as well as to a single HDMI output with analog stereo
audio breakout. The UHD source may be distributed to any of four HDBaseT
Receivers via a single Cat.5e/6/7 cable (up to 70m at 1080p or up to 40m at
4K). Despite HDBaseT?s 10.Gbps bandwidth limitation, 4K UHD HDMI video
sources, up to and including 4K@60Hz (4:4:4, 8-bit) as well as 10/12-bit
sources with HDR, are able to be processed and extended by the use of AVLC
(Adaptive Visually Lossless Compression) when connected to compatible AVLC
Receivers. If the connected HDBaseT Receiver can?t support AVLC, 4K@60Hz
RGB/YUV 4:4:4 signals will be converted to YUV 4:2:0 or downscaled to 1080p
based on the detected EDID on each output.
This unit provides solid audio support, including bypassing 8 channel LPCM
digital audio as well as advanced Bitstream and HD Bitstream audio formats
via HDBaseT and HDMI. Additionally, an analog stereo audio breakout output is
available to provide audio to local powered speakers (LPCM 2.0 sources only).
Standard EDID management functionality is included and the PoH (Power over
HDBaseT) feature can provide power to compatible receivers, providing greater
flexibility in installations. Control is via front panel controls with an OSD and
RS-232.
- Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input
and output, Deep Color input and output up to 12-bit. and 10-bit and 12-
bit HDR (High Dynamic Range) input/output
- Supports automatic 4K@60Hz RGB/YUV 4:4:4 to YUV 4:2:0 conversion or
downscaling to 1080p for compatibility with non-AVLC HDBaseT receivers
based on the detected EDID on each output
- Supports pass-through of all standard digital audio formats: 8 channel
LPCM, Bitstream, and HD Bitstream. High-quality Digital to Analog audio
Conversion (DAC) with local analog stereo audio breakout (LPCM 2.0
sources only)
- Comprehensive EDID management options
- HDBaseT feature support: HD Video and Audio, PoH and Control (bidirectional RS-2323 and IR pass-through)
- Supports standard PoH from the unit to connected HDBaseT receivers
(compatible receivers only)
Interfaces | |
---|
Input Port | |
Output Port | - 4×HDBaseT (RJ-45)
- 1×HDMI (Type-A)
- 1×Balanced Audio (5-pin Terminal Block)
|
Control I/O | |
Pass-through Port | - 1×IR Extender (3.5mm)
- 1×IR Blaster (3.5mm)
|
Service Port | |
Video | |
---|
HDMI Compliance | |
HDCP Compliance | |
Input Signal Types | - 4096x2160@60Hz YUV 4:2:0 8bit
|
Output Saignal Type | - 4096x2160@60Hz YUV 4:2:0 8bit 4096x2160@60 YUV 4:2:0
|
Resolutions | | |
---|
Maximum Input | HDMI | |
Maximum Output | HDMI | |
| HDBT | - 4096x2160p@60
- 3840x2160p@60 with AVLC activ
|
Audio | |
---|
HDMI | - LPCM (8 Channels), Bitstream, High Bit Rate Bitstream
|
HDBT | - LPCM (8 Channels), Bitstream, High Bit Rate Bitstream
|
Line Out | - 2 Vrms S/N Ratio: > 80dB (1kHz with 0dBFS)
|
Power | |
---|
Power Supply | |
Power Consumption | |
Enclosure | |
---|
Chassis Material | |
Chassis Color | |
Dimensions (W×H×D) | - 432mm×44mm×174mm [Case Only]
- 432mm×44mm×180mm [All Inclusive]
|
Weight | |
Field Firmware Update | |
---|
Interface | |
Ordering Information | |
---|
Model No. | Product Description |
CHDBT-1H4CPLV | - 4K UHD+ 1 by 4+1 HDBaseT/HDMI Splitter
|
CH-1527RXPLV | - 4K UHD+ HDMI over HDBaseT Receiver(PD)
|