Fiber-Optic Extension Link
Artikel 1 - 33 von 33
1 Gang-sized Multi-format Wall Plate Converter, HDHF-4K receives HDMI 2.0 and DisplayPort 1.2 into optical HDMI 2.0 signal and transmits it up to 200m(656ft) over one (1) multi-mode fiber (OM3) without any data compression or latency. To recover electrical HDMI signal, one (1) fiber HDMI receiver, HDFX-500-RX and HDFX-700-RX should be used at the display end.
Wall-mounted HDMI converter, transmitting uncompressed HDMI signal 2.0 over fiber
The transmitter and receiver set, DPFX-250-TR enables to transmit 4K (4096x2160) at 60Hz signal up to 200m (656feet) over two (2) LC multi-mode fibers, avoiding any tricks like scaling or data compression for lessening a burden of data transmission.
The transmitter and receiver set, DPFX-250-TR enables to transmit 4K (4096x2160) at 60Hz signal up to 200m (656feet) over two (2) LC multi-mode fibers, avoiding any tricks like scaling or data compression for lessening a burden of data transmission.
The transmitter and receiver set, DPFX-250-TR enables to transmit 4K (4096x2160) at 60Hz signal up to 200m (656feet) over two (2) LC multi-mode fibers, avoiding any tricks like scaling or data compression for lessening a burden of data transmission.
DPFX-1F14-TR, which means DisplayPort Extender with one (1) Fiber that supports DisplayPort 1.4 signal. It extends to 200m (656 feet) and transmits up to 8K DSC (7680x4320) at 60Hz. The cutting-edge technology of Opticis reduces limits in the installation by providing an option for a longer additional extension.
Kompressionsfreie 1:1 Übertragung von Displayport 1.2 Signalen über 1 LC-Glasfaser (Multimode OM3 oder besser) bis maximal 100 m. Maximale Auflösung 4K (4.096 x 2.160) bei 60 Hz mit 10 bit Farbtiefe. Spannungsversorgung über USB-Kabel oder über die Displayport-Schnittstelle. Vollkommen transparente Verbindung, keine Treiber erforderlich!
Der abnehmbare HDMI 2.0-Glasfaser-Extender HDFX-350 verlängert das HDMI 2.0-Signal auf bis zu 200 m und überträgt 4K UHD (4096x2160) mit 60 Hz über eine Duplex-LC-Multimode-Faser. Die Spitzentechnologie von Opticis ermöglicht die Übertragung von 4K-Signalen über große Entfernungen ohne Verschlechterung der Bild- und Tonqualität.
Kompressionsfreie 1:1 Übertragung von HDMI 2.0 Signalen über 1 LC-Glasfaser (Multimode OM3 oder besser) bis maximal 100 m. Maximale Auflösung 4K (4.096 x 2.160) bei 60 Hz mit 10 bit Farbtiefe (RGB & YCbCr 4:4:4). Spannungsversorgung über USB-Kabel oder über die HDMI-Schnittstelle. Kompatibel zu 3D, CEC, EDID und HDCP 2.2. Vollkommen transparente Verbindung, keine Treiber erforderlich!
HDMI 2.0 one(1) fiber optical detachable extender with copper extension, HDFX-700-TR, extends HDMI 2.0 signal up to 200m (656feet) and transmits 4K UHD (4096x2160) at 60Hz over one(1) LC multi-mode fiber(OM3). Cutting-edge technology of Opticis reduces limits in installation by providing an option for longer copper extension.
Der abnehmbare HDMI 2.0-Glasfaser-Extender HDFX-350 verlängert das HDMI 2.0-Signal auf bis zu 200 m und überträgt 4K UHD (4096x2160) mit 60 Hz über eine Duplex-LC-Multimode-Faser. Die Spitzentechnologie von Opticis ermöglicht die Übertragung von 4K-Signalen über große Entfernungen ohne Verschlechterung der Bild- und Tonqualität.
Kompressionsfreie 1:1 Übertragung von HDMI 2.0 Signalen über 1 LC-Glasfaser (Multimode OM3 oder besser) bis maximal 100 m. Maximale Auflösung 4K (4.096 x 2.160) bei 60 Hz mit 10 bit Farbtiefe (RGB & YCbCr 4:4:4). Spannungsversorgung über USB-Kabel oder über die HDMI-Schnittstelle. Kompatibel zu 3D, CEC, EDID und HDCP 2.2. Vollkommen transparente Verbindung, keine Treiber erforderlich!
HDMI 2.0 one(1) fiber optical detachable extender with copper extension, HDFX-700-TR, extends HDMI 2.0 signal up to 200m (656feet) and transmits 4K UHD (4096x2160) at 60Hz over one(1) LC multi-mode fiber(OM3). Cutting-edge technology of Opticis reduces limits in installation by providing an option for longer copper extension.
Der abnehmbare HDMI 2.0-Glasfaser-Extender HDFX-350 verlängert das HDMI 2.0-Signal auf bis zu 200 m und überträgt 4K UHD (4096x2160) mit 60 Hz über eine Duplex-LC-Multimode-Faser. Die Spitzentechnologie von Opticis ermöglicht die Übertragung von 4K-Signalen über große Entfernungen ohne Verschlechterung der Bild- und Tonqualität.
Kompressionsfreie 1:1 Übertragung von HDMI 2.0 Signalen über 1 LC-Glasfaser (Multimode OM3 oder besser) bis maximal 100 m. Maximale Auflösung 4K (4.096 x 2.160) bei 60 Hz mit 10 bit Farbtiefe (RGB & YCbCr 4:4:4). Spannungsversorgung über USB-Kabel oder über die HDMI-Schnittstelle. Kompatibel zu 3D, CEC, EDID und HDCP 2.2. Vollkommen transparente Verbindung, keine Treiber erforderlich!
HDMI 2.0 one(1) fiber optical detachable extender with copper extension, HDFX-700-TR, extends HDMI 2.0 signal up to 200m (656feet) and transmits 4K UHD (4096x2160) at 60Hz over one(1) LC multi-mode fiber(OM3). Cutting-edge technology of Opticis reduces limits in installation by providing an option for longer copper extension.
Kompressionsfreie 1:1 Übertragung von Displayport 1.1a Signalen über 2 LC-Glasfasern (Multimode OM3 oder besser) bis maximal 200 m. Maximale Auflösung WQXGA (2.560 x 1.600) bei 60 Hz mit 10 bit Farbtiefe. Spannungsversorgung über USB-Kabel oder mitgeliefertes Netzteil. Vollkommen transparente Verbindung, keine Treiber erforderlich!
Opticis BR-400, 19” 1RU frame is an ideal solution for Opticis optical module products and the systematic fiber-optic needs to adopt up to 8 units of DVI/HDMI/Displayport optical extenders from Opticis securely in place. Each module slot is connected into a central power bus. Both two(2) power supply frames use 100-240VAC, 50-60Hz of input power, BR-400 for dual powers with load-sharing and redundant backup. Its LEDs are indicated in the front panel for power supply failure. The rack ears of BR-400 are installed on both front and rear up to users’ preference.
OPTICIS BR-500, 19” 1RU multi-mounting rack is a modular rack and systematic fiber-optic solution providing flexibility to install Opticis DisplayPort 1.2 modules up to 8 units. DPFX-200-Tx or DPFX-300-Tx is required in use.
DDFX-100-TR transmits uncompressed WQXGA (2560x1600), 60Hz or WQUXGA (3840x2400), 33Hz refresh ratio of Dual-Link DVI up to 500meters (1640feet) over two (2) LC multi-mode fibers. The EDID in a display can be read and restored by just plugging once transmitter to the display.
With OPTICIS leading-edge fiber-optic technology, DVFX-100-TR is capable of driving uncompressed WUXGA (1920x1200) 60Hz and even more up to 2K resolution of DVI signal up to 500m (1640ft) over one(1) SC multi-mode fiber.
With OPTICIS leading-edge fiber-optic technology, DVFX-100-TR is capable of driving uncompressed WUXGA (1920x1200) 60Hz and even more up to 2K resolution of DVI signal up to 500m (1640ft) over one(1) SC multi-mode fiber.
With OPTICIS leading-edge fiber-optic technology, DVFX-100-TR is capable of driving uncompressed WUXGA (1920x1200) 60Hz and even more up to 2K resolution of DVI signal up to 500m (1640ft) over one(1) SC multi-mode fiber.
DVFX-110-TR is capable of driving uncompressed WUXGA (1920x1200) 60Hz DVI signal up to 1,000m (3280feet) over one (1) SC single-mode or 500m (1640feet) over one (1) SC multi-mode fiber. The key features of DVFX-110-TR is, by using an optical passive splitter (OPS-116S), one (1) signal from transmitter can be copied up to 16 times and it gives you a cost effective and space saving installation for various application.
The detachable DVI extender, M1-201DA-TR offers easy connection to your existing system with minimum efforts and no modification, since it is designed compactly enough and with all industry standard connectors. The metallic die-casting enclosure gives reliable installation, excellent EMI shields and heat dissipation in harsh and noisy environments.
The detachable DVI extender, M1-201DA-TR offers easy connection to your existing system with minimum efforts and no modification, since it is designed compactly enough and with all industry standard connectors. The metallic die-casting enclosure gives reliable installation, excellent EMI shields and heat dissipation in harsh and noisy environments.
M1-201EA-R is a monitor embedded type of optical receiver compatible with a transmitter of M1-201SA-TR over two (2) duplex multi-mode fiber. It also transmits uncompressed WUXGA (1920x1200) 60Hz DVI signal up to 500m (1640feet).
M1-201SA-TR is capable of driving uncompressed WUXGA (1920x1200) 60Hz DVI signal up to 500m (1640feet) over a pair of duplex LC multi-mode fiber.
M1-201SA-TR is capable of driving uncompressed WUXGA (1920x1200) 60Hz DVI signal up to 500m (1640feet) over a pair of duplex LC multi-mode fiber.
Artikel 1 - 33 von 33